Micro Linear ML4812
The ML4812 is designed to optimally facilitate a peak current control boost type power factor correction system. The circuit includes a precision reference, gain modulator, error amplifier, overvoltage protection, ramp compensation, as well as a high current output. Special care has been taken in the design of the ML4812 to increase system noise immunity.- Min Voltage : 12V
- Max Voltage : 25V
- Max Operating Temp : 85°C
- Min Operating Temp : -40°C
Source:
Octopart
| Part No. | ML4812 |
|---|---|
| Datasheet | ML4812 Download |
| Manufacturer |  Micro Linear |
| Description | Power Factor Controller |
| Buy | Stock & Price |
GENERAL DESCRIPTION
In addition, start-up is simplified by an under-voltage lockout circuit with 6V hysteresis. In a typical application, the ML4812 functions as a current mode regulator. The current which is necessary to terminate the cycle is a product of the sinusoidal line voltage times the output of the error amplifier which is regulating the output DC voltage. Ramp compensation is programmable with an external resistor, to provide stable operation when the duty cycle exceeds 50%.FEATURES
s s Precision buffered 5V reference (±0.5%) Current-input gain modulator reduces external components and improves noise immunity Programmable ramp compensation circuit 1A peak current totem-pole output drive Overvoltage comparator helps prevent output voltage “runaway” Wide common mode range in current sense comparators for better noise immunity Large oscillator amplitude for better noise immunity s s s s s * Some Packages Are End Of Life BLOCK DIAGRAM (Pin Configuration Shown is for DIP Version...
