Datasheet4U Logo Datasheet4U.com

ML4828 - BiCMOS Phase Modulation/Soft Switching Controller

Description

The ML4828 is a complete BiCMOS phase modulation control IC suitable for full bridge soft switching converters.

Unlike conventional PWM circuits, the phase modulation technique allows for zero voltage switching (ZVS) transitions and square wave drive across the transformer.

Features

  • a 1.5V hysteresis with a low starting current to allow off-line start up with a bleed resistor. A shutdown function powers down the IC, putting it into a low quiescent state. The circuit can be operated at frequencies up to 1MHz. The ML4828 contains four high current CMOS outputs which feature high slew rate with low cross conduction.

📥 Download Datasheet

Datasheet preview – ML4828

Datasheet Details

Part number ML4828
Manufacturer Micro Linear
File Size 187.74 KB
Description BiCMOS Phase Modulation/Soft Switching Controller
Datasheet download datasheet ML4828 Datasheet
Additional preview pages of the ML4828 datasheet.

📁 Similar Datasheet

  • ML4821 - Power Factor Controller (Fairchild)
  • ML4823 - High Frequency Power Supply Controller (Fairchild)
  • ML4824 - Power Factor Correction and PWM Controller Combo (Fairchild)
  • ML4826 - PFC and Dual Output PWM Controller Combo (Fairchild)
  • ML4827 - Fault-Protected PFC and PWM Controller Combo (Fairchild)
  • ML4800 - Power Factor Correction and PWM Controller Combo (Fairchild)
  • ML4801 - Variable Feedforward PFC/PWM Controller Combo (Fairchild)
  • ML4802 - PFC/PWM Controller Combo with Green Mode (Fairchild)
  • ML4803 - 8-Pin PFC and PWM Controller Combo (Fairchild)
  • ML4804 - Power Factor Correction and PWM Controller Combo (Fairchild)
Other Datasheets by Micro Linear
  • ML4821 - Power Factor Controller
  • ML4822 - ZVS Average Current PFC Controller
  • ML4823 - High Frequency Power Supply Controller
  • ML4824 - Power Factor Correction and PWM Controller Combo
  • ML4825 - High Frequency Power Supply Controller
  • ML4826 - PFC and Dual Output PWM Controller Combo
  • ML4827 - Fault-Protected PFC and PWM Controller Combo
  • ML4800 - Power Factor Correction and PWM Controller Combo

Full PDF Text Transcription

Click to expand full text
May 1997 ML4828* BiCMOS Phase Modulation/Soft Switching Controller GENERAL DESCRIPTION The ML4828 is a complete BiCMOS phase modulation control IC suitable for full bridge soft switching converters. Unlike conventional PWM circuits, the phase modulation technique allows for zero voltage switching (ZVS) transitions and square wave drive across the transformer. The IC modulates the phases of the two sides of the bridge to control output power. The ML4828 can be operated in either voltage or current mode. Both cycle-by-cycle current limit, integrating fault detection, and soft start reset are provided. The undervoltage lockout circuit features a 1.5V hysteresis with a low starting current to allow off-line start up with a bleed resistor.
Published: |