Datasheet4U Logo Datasheet4U.com

CM8601 - 3 Watt Audio Power Amplifier

Description

table communication device applications.

Features

  • a low-power consumption shutdown mode. To facilitate this, Shutdown may be enabled by either logic high or low depending on mode selection. Driving the shutdown mode pin either high or low enables the shutdown pin to be driven in a likewise manner to enable shutdown. The CM8601 contains advanced pop & click circuitry which eliminates noise which would otherwise occur during turnon and turn-off transitions. The CM8601 is unity-gain stable and can be configured by external gain-setting resistors.

📥 Download Datasheet

Datasheet preview – CM8601

Datasheet Details

Part number CM8601
Manufacturer Micro Technology
File Size 738.49 KB
Description 3 Watt Audio Power Amplifier
Datasheet download datasheet CM8601 Datasheet
Additional preview pages of the CM8601 datasheet.

📁 Similar Datasheet

  • CM8601 - 3 Watt Audio Power Amplifier (ccmic)
  • CM8600 - 3 Watt Audio Power Amplifier (Plough)
  • CM8600A - 3 Watt Audio Power Amplifier (ccmic)
  • CM8600C - 3W Mono Class AB Audio Amplifier (ccmic)
  • CM8602B - 2.4W Audio Amplifier Stereo (ETC)
  • CM8608 - CLASS AB STEREO HEADPHONE DRIVER (Champion)
  • CM8608 - Class AB Stereo Headphone Driver (Bookly)
  • CM8662 - AUDIO POWER AMP (Champion)
  • CM8662 - 1.7W CMOS AUDIO AMP (BOOKLY MICRO)
  • CM8663 - STEREO AUDIO POWER AMP (Champion)
Other Datasheets by Micro Technology

    Full PDF Text Transcription

    Click to expand full text
    CM8601 3 Watt Audio Power Amplifier with Selectable Shutdown Logic Level General Description The CM8601 is an audio power amplifier primarily designed for demanding applications in mobile phones and other por- table communication device applications. It is capable of delivering 1.25 watts of continuous average power to an 8 BTL load and 2 watts of continuous average power (LD and MH only) to a 4ΩBTL load with less than 1% distortion (THD+N+N) from a 5.5VDC power supply. Boomer audio power amplifiers were designed specifically to provide high quality output power with a minimal amount of external components.
    Published: |