MS-2610 Overview
MS 2610 O3 Gas Sensor This datasheet describes the use of the MS-2610 in ozone detection applications. The package and the mode of operation described in this document target the detection of the oxidizing gas O3 in indoor or outdoor environments. Ozone is a hazardous gas, which can cause respiratory problems at concentrations above 100 ppb.
MS-2610 Key Features
- Low heater current
- Wide detection range
- High sensitivity
- Fast thermal response
- Electro-Static Discharge protected
- Miniature dimensions
- High resistance to shocks and vibrations
- Tin oxide (SnO2) gas sensors require a relatively long warm up period before correct O3 measurements can be taken. It is
- The sensor must not be wave-soldered without protection or exposed to high concentrations of organic solvents or corrosi
- Heater voltages above the specified maximum rating of 2.5 V will destroy the sensor. An increase of 0.5 V at 2.35 V caus