34AA02 Datasheet | Microchip Technology

Features - Permanent and Resettable Software Write-Protect for Lower Half of the Array (00h-7Fh) - Single Supply with Operation Down to 1.7V - Low-Power CMOS Technology: - Read current: 1 m A, typical - Standby current: 100 n A, typical - Two-Wire Serial Interface Bus, I2C patible - Cascadable Up to Eight Devices - Schmitt Trigger Inputs for Noise Suppression - Output Slope Control to Eliminate Ground Bounce - 100 k Hz and 400 k Hz patibility - 1 MHz Clock for LC Versions - Page Write Time: 5 ms, Maximum - Self-Timed Erase/Write Cycle - 16-Byte Page Write Buffer - ESD Protection > 4,000V - Software Write Protection for Lower 128 Bytes - Hardware Write Protection for Entire Array - More than 1 Million Erase/Write Cycles - Data Retention > 200 Years - Ro HS pliant - Available for Extended Temperature Ranges: - Industrial (I): -40°C to +85°C - Extended (E): -40°C to +125°C - Automotive AEC-Q100 Qualified Packages - 8-Lead MSOP, 8-Lead PDIP, 8-Lead SOIC, 6-Lead SOT-23, 8-Lead TDFN and 8-Lead TSSOP Description The Microchip Technology Inc. 34XX02(1) is a 2-Kbit Electrically Erasable PROM (EEPROM). This device has two software write-protect features for the lower half of the array, as well as an external pin that can be used to write-protect the entire array. This allows the system designer to protect none, half or all of the array, depending on the application. The device is organized as one block of 256 x 8-bit memory with a two-wire serial interface. Its low-voltage design permits operation down to 1.7V, with standby and active currents of only 100 n A and 1 m A, respectively. The 34XX02 also has a page write capability for up to 16 bytes of data. Note 1: 34XX02 is used in this document as a generic part number for the 34AA02/34LC02 devices. Package Types MSOP/PDIP/SOIC/TSSOP A0 1 A1 2 8 VCC 7 WP A2 3 6 SCL VSS 4 5 SDA SOT-23 SCL...