Datasheet4U Logo Datasheet4U.com

MCP2025 - LIN Transceiver

General Description

The MCP2025 provides a bidirectional, half-duplex communication physical interface to meet the LIN bus specification Revision 2.1 and SAE J2602-2.

The device incorporates a voltage regulator with 5V or 3.3V at 70 mA regulated power supply output.

Key Features

  • Compliant with LIN Bus Specifications Version 1.3, 2.1 and with SAE J2602-2.
  • Supports Baud Rates up to 20 kBaud.
  • 43V Load Dump Protected.
  • Maximum Continuous Input Voltage: 30V.
  • Wide LIN-Compliant Supply Voltage: 6.0-18.0V.
  • Extended Temperature Range: -40°C to +125°C.
  • Interface to PIC® EUSART and Standard USARTs.
  • Wake-Up on LIN Bus Activity or Local Wake Input.
  • Local Interconnect Network (LIN) Bus Pin: - Internal P.

📥 Download Datasheet

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MCP2025 LIN Transceiver with Voltage Regulator Features: • Compliant with LIN Bus Specifications Version 1.3, 2.1 and with SAE J2602-2 • Supports Baud Rates up to 20 kBaud • 43V Load Dump Protected • Maximum Continuous Input Voltage: 30V • Wide LIN-Compliant Supply Voltage: 6.0-18.0V • Extended Temperature Range: -40°C to +125°C • Interface to PIC® EUSART and Standard USARTs • Wake-Up on LIN Bus Activity or Local Wake Input • Local Interconnect Network (LIN) Bus Pin: - Internal Pull-Up Termination Resistor and Diode for Slave Node - Protected Against VBAT Shorts - Protected Against Loss of Ground - High-Current Drive • TXD and LIN Bus Dominant Time-Out Function • Two Low-Power Modes: - Transmitter Off: 90 µA (typical) - Power Down: 4.