Datasheet4U Logo Datasheet4U.com

MCRF200 - 125 kHz microID Passive RFID Device

Description

The MCRF200 is a passive Radio Frequency Identification (RFID) device for low-frequency applications (100 kHz-400 kHz).

The device is powered by rectifying an incoming RF signal from the reader.

The device requires an external LC resonant circuit to receive the incoming RF signal and to send data.

Features

  • Factory programming and memory serialization (SQTPSM).
  • One-time contactless programmable (developer kit only).
  • Read-only data transmission after programming.
  • 96 or 128 bits of One-Time Programmable (OTP) user memory (also supports 48 and 64-bit protocols).
  • Typical operation frequency: 100 kHz-400 kHz.
  • Ultra low-power operation (5 µA @ VCC = 2V).
  • Modulation options: - ASK, FSK, PSK.
  • Data Encoding options: - NRZ Direct, Diffe.

📥 Download Datasheet

Datasheet preview – MCRF200

Datasheet Details

Part number MCRF200
Manufacturer Microchip Technology
File Size 294.19 KB
Description 125 kHz microID Passive RFID Device
Datasheet download datasheet MCRF200 Datasheet
Additional preview pages of the MCRF200 datasheet.

📁 Similar Datasheet

  • MCR004 - Thick Film Chip Resistors (Rohm)
  • MCR004E - General purpose chip resistors (ROHM)
  • MCR006 - Thick film chip resistors (Rohm)
  • MCR01 - Thick Film Chip Resistors (Rohm)
  • MCR02 - Ethernet Based Contactless Card R/W Terminals (OTTRON)
  • MCR0201AT - High Stability Thin Film Flat Chip Resistors (Vishay)
  • MCR03 - Thick Film Chip Resistors (Rohm)
  • MCR05 - Ethernet Based Contactless Card R/W Terminals (OTTRON)
  • MCR08 - SENSITIVE GATE SILICON CONTROLLED RECTIFIER (UTC)
  • MCR08B - Thyristors (Littelfuse)
Other Datasheets by Microchip Technology
  • MCRF202 - 125 kHz Passive RFID Device
  • MCRF355 - 13.56 MHz Passive RFID Device with Anti-Collision Feature
  • MCRF360 - 13.56 MHz Passive RFID Device with Anti-Collision Feature
  • MCRF450 - 13.56 MHz Read/Write Passive RFID Device
  • MCRF451 - 13.56 MHz Read/Write Passive RFID Device
  • MCRF452 - 13.56 MHz Read/Write Passive RFID Device
  • MCRF455 - 13.56 MHz Read/Write Passive RFID Device

Full PDF Text Transcription

Click to expand full text
MCRF200 125 kHz microID™ Passive RFID Device Features • Factory programming and memory serialization (SQTPSM) • One-time contactless programmable (developer kit only) • Read-only data transmission after programming • 96 or 128 bits of One-Time Programmable (OTP) user memory (also supports 48 and 64-bit protocols) • Typical operation frequency: 100 kHz-400 kHz • Ultra low-power operation (5 µA @ VCC = 2V) • Modulation options: - ASK, FSK, PSK • Data Encoding options: - NRZ Direct, Differential Biphase, Manchester Biphase • Die, wafer, COB, PDIP or SOIC package options • Factory programming options Package Type PDIP/SOIC VA NC I/O RESET 1 2 3 4 8 7 6 5 VB NC VSS VCC Note: Pins 3, 4, 5 and 6 are for device test purposes only. Pins 1 and 8 are for antenna connections. DO NOT ground pin 5.
Published: |