PIC18F4510 Datasheet Text
PIC18F2X1X/4X1X
28/40/44-Pin Flash Microcontrollers with 10-Bit A/D and nanoWatt Technology
Power-Managed Modes:
- Run: CPU On, Peripherals On
- Idle: CPU Off, Peripherals On
- Sleep: CPU Off, Peripherals Off
- Idle mode Currents Down to 3.0 μA Typical
- Sleep mode Currents Down to 20 nA Typical
- Timer1 Oscillator: 1.8 μA, 32 kHz, 2V
- Watchdog Timer: 2.1 μA
- Two-Speed Oscillator Start-up
Peripheral Highlights:
- High-Current Sink/Source 25 mA/25 mA
- Up to 2 Capture/pare/PWM (CCP) modules,
One with Auto-Shutdown (28-pin devices)
- Enhanced Capture/pare/PWM (ECCP) module (40/44-pin devices only):
- One, two or four PWM outputs
- Selectable polarity
- Programmable dead time
- Auto-shutdown and auto-restart
- Master Synchronous Serial Port (MSSP) module Supporting 3-Wire SPI (all 4 modes) and I2C™ Master and Slave modes
- Enhanced Addressable USART module:
- Supports RS-485, RS-232 and LIN 1.2
- RS-232 operation using internal oscillator block...