Datasheet4U Logo Datasheet4U.com

TC1030 - Quad Low Power Op Amp

General Description

The TC1030 is a quad CMOS operational amplifier designed for low power applications.

It has a typical operating supply current of 20µA which is constant over the supply voltage range of 1.8V to 5.5V.

Key Features

  • Optimized for Single Supply Operation Small Package: 16-Pin QSOP Ultra Low Input Bias Current: Less than 100pA Low Quiescent Current, Operating: 20µA (Typ. ), Shutdown Mode: 6µA (Typ. ).
  • Rail-to-Rail Inputs and Outputs.
  • Operates Down to 1.8V.
  • Can Shut Down One, Two or Three Op Amps General.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
TC1030 LINEAR BUILDING BLOCK - QUAD LOW POWER OP AMP TelCom Semiconductor
TC1031 LOW POWER COMPARATOR AND VOLTAGE REFERENCE TelCom Semiconductor
TC100 Ceramic Disc Capacitor Cosonic Enterprise
TC100PA (TC Series) Thick Film on Porceleinized Steel Substrate Ohmite Manufacturing
TC1014 50mA CMOS LDO TelCom Semiconductor

Other Datasheets by Microchip Technology

Part Number Description
TC1031 Low Power Voltage Reference
TC1034 Single Operational Amplifiers
TC1037 Single Comparator
TC1014 CMOS LDOs
TC1015 CMOS LDOs

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
TC1030 Linear Building Block – Quad Low Power Op Amp with Shutdown Modes Features • • • • Optimized for Single Supply Operation Small Package: 16-Pin QSOP Ultra Low Input Bias Current: Less than 100pA Low Quiescent Current, Operating: 20µA (Typ.), Shutdown Mode: 6µA (Typ.) • Rail-to-Rail Inputs and Outputs • Operates Down to 1.8V • Can Shut Down One, Two or Three Op Amps General Description The TC1030 is a quad CMOS operational amplifier designed for low power applications. It has a typical operating supply current of 20µA which is constant over the supply voltage range of 1.8V to 5.5V. Each op amp has rail-to-rail inputs and output which allow operation at low supply voltages with large input and output signal swings. Two active low shutdown pins are provided.