24AA00 Overview
The Microchip Technology Inc. Low-voltage design permits operation down to 1.8 volts for the 24AA00 version, and every version maintains a maximum standby current of only 1 A and typical active current of only 500 A. This device was designed for where a small amount of EEPROM is needed for the storage of calibration values, ID numbers or manufacturing information, etc.
24AA00 Key Features
- Single Supply with Operation down to 1.8V for 24AA00 Devices, 2.5V for 24LC00 Devices
- Low-Power CMOS Technology
- Read current 500 A, typical
- Standby current 100 nA, typical
- 2-Wire Serial Interface, I2C patible
- Schmitt Trigger Inputs for Noise Suppression
- Output Slope Control to Eliminate Ground Bounce
- 100 kHz and 400 kHz Clock patibility
- Page Write Time 3 ms, Typical
- Self-Timed Erase/Write Cycle