Datasheet4U Logo Datasheet4U.com

ATA5577C - Read/Write LF RFID IDIC

Key Features

  • These are the following features of read/write LF RFID IDIC 100 kHz to 150 kHz:.
  • Contactless Power Supply.
  • Contactless Read/Write Data Transmission.
  • Radio Frequency fRF from 100 kHz to 150 kHz.
  • Basic mode or Extended mode.
  • Compatible with T5557, ATA5567.
  • Replacement for e5551/T5551 in Most Common Operation modes.
  • Configurable for ISO/IEC 11784/785 Compatibility.
  • Total 363 Bits EEPROM Memory: 11 Blocks (32 bits + 1 lock bit):.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
ATA5577 Read/Write LF RFID IDIC 100 to 150 kHz ATMEL Corporation
ATA5577M1330C-PP Read/Write LF RFID IDIC Transponder Atmel
ATA5570 Multifunctional 330-bit Read/Write RF Sensor Identification IC ATMEL Corporation
ATA5575M1 Read/Write LF RFID IDIC 100 kHz to 150 kHz ATMEL Corporation
ATA5575M2 Read/Write LF RFID IDIC 100kHz to 150kHz ATMEL Corporation

Other Datasheets by Microchip Technology

Part Number Description
ATA5835 UHF ASK/FSK Transceiver
ATA6560 High-Speed CAN Transceiver
ATA6561 High-Speed CAN Transceiver
ATA6562 High-Speed CAN Transceiver
ATA6563 High-Speed CAN Transceiver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
ATA5577C ATA5577C – Read/Write LF RFID IDIC 100 kHz to 150 kHz Introduction The ATA5577C is a contactless read/write Identification Integrated Chip (IDIC®) for applications in the 125 kHz or 134 kHz frequency band. A single coil connected to the chip serves as the IC’s power supply and bidirectional communication interface. The antenna and chip together form a transponder or tag. The on-chip 363-bit EEPROM (11 blocks with 33 bits each) is read and written blockwise from a base station (reader). Data are transmitted from the IDIC (uplink) using load modulation. This is achieved by damping the RF field with a resistive load between the two terminals, “Coil 1 and Coil 2”.