Microchip Technology HV2721
The HV2721 has integrated bleed resistors on both sides of the switches. The bleed resistor eliminates voltage build-up on capacitive loads such as piezoelectric transducers. DS20006082A-page 1 HV2621/HV2721/HV2722 Block Diagram Latches D LE CLR Level Shifter D LE CLR CLK DIN DOUT 16-Bit Shift Register D LE CLR D LE CLR D LE CLR Output Switches Bleed Resistors SW0A SW0B SW1A SW1B SW2A SW2B SW14A SW14B SW15A SW15B VDD GND LE CLR VNN VPP RGND HV2721 has bleed resistors at...| Part No. | HV2721 |
|---|---|
| Datasheet | HV2721 Download |
| Manufacturer |  Microchip Technology |
| Description | High-Voltage Analog Switch |
| Buy | Stock & Price |
FEATURES
● 300V,16-Channel High-Voltage Analog Switch● 3.3V or 5.0V CMOS Input Logic Level
● 33 MHz Data Shift Clock Frequency
● Very Low Quiescent Current (10 µA)
● Low Parasitic Capacitance
● DC to 50 MHz Analog Small-Signal Frequency
● -60 dB Typical Off Isolation at 5.0 MHz
● Excellent Noise Immunity
● Cascadable Serial Data Register with Latches
● Flexible Operating Supply Voltage
● Integrated Bleed Resistors on the Outputs (both sides for HV2721, one side only for HV2722)
APPLICATIONS
● Medical Ultrasound Imaging● Nondestructive Testing (NDT) Metal Flaw Detection
● Multi-Layer Printed Circuit Board (PCB) Tester
● Piezoelectric Transducer Drivers
● Inkjet Printer Head
● Optical MEMS Module
GENERAL DESCRIPTION
The HV2621/HV2721/HV2722 devices are 300V, low-charge injection, 16-channel, high-voltage analog switches. These devices are designed for use in applications requiring high-voltage switching controlled by low-voltage control signals, such as medical ultrasound imaging, piezoelectric transducer drivers.
