Microchip Technology MCP130
The MCP130 has an internal 5 kΩ pullup resistor. Both devices have active low RESET pins. The MCP120/130 will assert the RESET signal whenever the voltage on the VDD pin is below the trip-point voltage.| Part No. | MCP130 |
|---|---|
| Datasheet | MCP130 Download |
| Manufacturer |  Microchip Technology |
| Description | Microcontroller |
| Buy | Stock & Price |
FEATURES
● Holds microcontroller in reset until supply voltage reaches stable operating level● Resets microcontroller during power loss
● Precision monitoring of 3V, 3.3V and 5V systems
● 7 voltage trip points available
● Active low RESET pin
● Open drain output
● Internal pull-up resistor (5 kΩ) for MCP130
● Holds RESET for 350 ms (typical)
● RESET to VCC = 1.0V
● Accuracy of ±125 mV for 5V systems and ±75 mV for 3V systems over temperature
● 45 µA typical operating current
● Temperature range: - Industrial (I): -40°C to +85°C PACKAGES TO-92 with ‘D’ Bondout TO-92 WITH ‘F’ BONDOUT RST VSS VDD VSS VDD RST MCP120 MCP130 MCP130 TO-92 with ‘G’ Bondout TO-92 with ‘H’ Bondout
DESCRIPTION
The Microchip Technology Inc. MCP120/130 is a voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper level and stabilized. It also operates as protection from brown-out conditions when the supply voltage drops below a safe operating level. Both devices are available with a choice of seven different trip voltages and both have open drain outputs.
