Microchip Technology MCP19111
The Analog Debug Output is selected when the ATSTCON bit is set. The IOC is disabled when MCLR is enabled.| Part No. | MCP19111 |
|---|---|
| Datasheet | MCP19111 Download |
| Manufacturer |  Microchip Technology |
| Description | Digitally-Enhanced Power Analog Controller |
| Buy | Stock & Price |
FEATURES
● Input Voltage: 4.5V to 32V● Output Voltage: 0.5V to 3.6V - Greater than 3.6V requires external divider
● Switching Frequency: 100 kHz to 1.6 MHz
● Quiescent Current: 5 mA Typical
● High-Drive: - +5V Gate Drive - 1A/2A Source Current - 1A/2A Sink Current
● Low-Drive: - +5V Gate Drive - 2A Source Current - 4A Sink Current
● Peak Current Mode Control
● Differential Remote Output Sense
● Multi-Phase Systems: - Master or Slave - Frequency Synchronized - Common Error Signal
● Multiple Output Systems: - Master or Slave - Frequency Synchronized - AEC-Q100 Qualified
● Configurable Parameters: - Overcurrent Limit - Input Undervoltage Lockout - Output Overvoltage - Output Undervoltage - Internal Analog Compensation - Soft Start Profile - Synchronous Driver Dead Time - Switching Frequency
● Thermal Shutdown Microcontroller
FEATURES
● Precision 8 MHz Internal Oscillator Block: - Factory Calibrated● Interrupt Capable - Firmware - Interrupt-on-Change Pins
● Only 35 Instructions to Learn...
