Microchip Technology MCP3001
MCP3001 is a successive approximation 10-bit A/D converter (ADC) with onboard sample and hold circuitry. The device provides a single pseudo-differential input. The device is capable of sample rates up to 200 ksps at a clock rate of 2.8 MHz.| Part No. | MCP3001 |
|---|---|
| Datasheet | MCP3001 Download |
| Manufacturer |  Microchip Technology |
| Description | 2.7V 10-Bit A/D Converter |
| Buy | Stock & Price |
FEATURES
● 10-bit resolution● ±1 LSB max DNL
● ±1 LSB max INL
● On-chip sample and hold
● SPI™ serial interface (modes 0,0 and 1,1)
● Single supply operation: 2.7V - 5.5V
● 200 ksps sampling rate at 5V
● 75 ksps sampling rate at 2.7V
● Low power CMOS technology - 5 nA typical standby current, 2 µA max - 500 µA max active current at 5V
● Industrial temp range: -40°C to +85°C
● 8-pin PDIP, SOIC, MSOP and TSSOP packages
APPLICATIONS
● Sensor Interface● Process Control
● Data Acquisition
● Battery Operated Systems
DESCRIPTION
The Microchip Technology Inc. Differential Nonlinearity (DNL) and Integral Nonlinearity (INL) are both specified at ±1 LSB max. Communication with the device is done using a simple serial interface compatible with the SPI protocol. The MCP3001 operates over a broad voltage range (2.7V - 5.5V). Low current design permits operation with a typical standby current of only 5 nA and a typical active current of 400 µA. The device is offered in 8-pin PDIP, MSOP, TSSOP and 150 mil SOIC packages.
