Microchip Technology MCP6566U
the MCP6566/6R/6U/7/9 family requires a pull-up resistor. It supports pull-up voltages that are above and below VDD, which can be used to level shift. The output toggle frequency can reach a typical 4 MHz (typical) while limiting supply current surges and dynamic power consumption during switching.| Part No. | MCP6566U |
|---|---|
| Datasheet | MCP6566U Download |
| Manufacturer |  Microchip Technology |
| Description | 1.8V Low Power Open-Drain Output Comparator |
| Buy | Stock & Price |
FEATURES
● Propagation Delay at 1.8 VDD: - 56 ns (typical) high-to-low● Low Quiescent Current: 100 µA (typical)
● Input Offset Voltage: ±3 mV (typical)
● Rail-to-Rail Input: VSS – 0.3V to VDD + 0.3V
● Open-Drain Output
● Wide Supply Voltage Range: 1.8V to 5.5V
● Available in Single, Dual and Quad
● Packages: SC70, SOT-23, SOIC, MSOP, TSSOP Typical
APPLICATIONS
● Laptop Computers● Mobile Phones
● Handheld Electronics
● RC Timers
● Alarm and Monitoring Circuits
● Window Comparators
● Multivibrators Design Aids
● Microchip Advanced Part Selector (MAPS)
● Analog Demonstration and Evaluation Boards
● Application Notes
● SPICE Macro Model Related Device
● Push-Pull Output: MCP6561/1R/1U/2/4 Typical Application Circuit VIN VDD R2 +3 VPU +5 VDD – MCP656X + VOUT R3 RF
DESCRIPTION
The Microchip MCP6566/6R/6U/7/9 family of opendrain output comparators is offered in single, dual and quad configurations. These comparators are optimized for low-power 1.8V, single-supply applications with greater than rail-to-rail input operation.
