Microchip Technology MD1210
The MD1210 is a high-speed, dual-MOSFET driver. It is designed to drive high-voltage P-channel and N-channel MOSFETs for medical ultrasound and other applications requiring a high output current for a capacitive load. The high-speed input stage of the MD1210 can operate from 1.2V to 5V logic interface with an optimum operating input signal range of 1.8V to 3.3V.| Part No. | MD1210 |
|---|---|
| Datasheet | MD1210 Download |
| Manufacturer |  Microchip Technology |
| Description | High-Speed Dual MOSFET Driver |
| Buy | Stock & Price |
FEATURES
● 6 ns Rise and Fall Time with 1000 pF Load● 2A Peak Output Source/Sink Current
● 1.2V to 5V Input CMOS Compatible
● 4.5V to 13V Single Positive Supply Voltage
● Smartlogic Threshold
● Low-Jitter Design
● Two Matched Channels
● Outputs can Swing Below Ground
● Low-Inductance Package
● Thermally Enhanced Package
APPLICATIONS
● Medical Ultrasound Imaging● Piezoelectric Transducer Drivers
● Non-Destructive Testing
● PIN Diode Drivers
● CCD Clock Drivers/Buffers
● High-Speed Level Translators
GENERAL DESCRIPTION
The MD1210 is a high-speed, dual-MOSFET driver. An adaptive threshold circuit is used to set the level translator switch threshold to the average of the input logic 0 and logic 1 levels. The input logic levels may be ground referenced even though the driver is putting out bipolar signals. The level translator uses a proprietary circuit, which provides DC coupling together with high-speed operation. VDD1, VDD2 and VH should be connected to the positive supply voltage, and VSS1, VSS2 and VL should be connected to 0V or ground.
