Datasheet4U Logo Datasheet4U.com

MIC33M650 - Pin Strapping Power Module

General Description

The MIC33M650 is a pin-selectable output voltage, high-efficiency, low-voltage input, 6A current, synchronous step-down regulator power module with integrated inductor.

Key Features

  • 2.4V to 5.5V Input Voltage Range.
  • 6A Output Current.
  • Pin Strapping Voltage Selection: - Tri-state pins (nine voltage options) - 0.6V, 0.8V, 0.9V, 1.0V, 1.2V, 1.5V, 1.8V, 2.5V or 3.3V output voltage.
  • Reduced Component Count (No Feedback Resistors).
  • High Efficiency (up to 95%).
  • Output Discharge when Disabled.
  • Constant-On-Time (COT) Control with High Switching Frequency: - 1.2 MHz typical at 1.0V output voltage.
  • ±1.5% Output V.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MIC33030 8MHz 400mA Internal Inductor Buck Regulator MICREL
MIC33050 4MHz Internal Inductor PWM Buck Regulator Micrel Semiconductor
MIC33153 4MHz PWM 1.2A Internal Inductor Buck Regulator MICREL
MIC33163 4MHz 1A Buck Regulator Micrel Semiconductor
MIC33164 4MHz 1A Buck Regulator Micrel Semiconductor

Other Datasheets by Microchip Technology

Part Number Description
MIC33M656 Power Module Buck Converter
MIC33M350 Pin Strapping Power Module
MIC33M356 Power Module Buck Converter
MIC33050 4MHz Internal Inductor PWM Buck Power Module
MIC33153 4MHz 1.2A Internal Inductor PWM Buck Regulator

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MIC33M650 6A, Pin Strapping Power Module with HyperLight Load® Mode and Output Voltage Select Features • 2.4V to 5.5V Input Voltage Range • 6A Output Current • Pin Strapping Voltage Selection: - Tri-state pins (nine voltage options) - 0.6V, 0.8V, 0.9V, 1.0V, 1.2V, 1.5V, 1.8V, 2.5V or 3.3V output voltage • Reduced Component Count (No Feedback Resistors) • High Efficiency (up to 95%) • Output Discharge when Disabled • Constant-On-Time (COT) Control with High Switching Frequency: - 1.2 MHz typical at 1.0V output voltage • ±1.5% Output Voltage Accuracy Over Line/Load/Temperature Range • 0.8 ms/V Soft Start Speed • Supports Safe Start-up with Pre-Biased Output • Typical 1.