Microchip Technology MIC5210
The MIC5210 is a dual linear voltage regulator with very low dropout voltage (typically 10 mV at light loads and 140 mV at 100 mA), very low ground current (225 µA at 10 mA output), and better than 1% initial accuracy. It also features individual logic-compatible enable/shutdown control inputs. Both regulator outputs can supply up to 150 mA at the same time as long as each regulator’s maximum junction temperature is not exceeded.| Part No. | MIC5210 |
|---|---|
| Datasheet | MIC5210 Download |
| Manufacturer |  Microchip Technology |
| Description | Dual 150mA LDO Regulator |
| Buy | Stock & Price |
FEATURES
● Mini 8 MSOP Package● Up to 150 mA per Regulator Output
● Low Quiescent Current
● Low Dropout Voltage
● Wide Selection of Output Voltages
● Tight Load and Line Regulation
● Low Temperature Coefficient
● Current and Thermal Limiting
● Reversed Input Polarity Protection
● Zero Off-Mode Current
● Logic-Controlled Electronic Enable
APPLICATIONS
● Cellular Telephones● Laptop, Notebook, and Palmtop Computers
● Battery-Powered Equipment
● Barcode Scanners
● SMPS Post-Regulator DC/DC Modules
● High-Efficiency Linear Power Supplies
GENERAL DESCRIPTION
Key features include a reference bypass pin to improve its already low-noise performance, reversed-battery protection, current limiting, and overtemperature shutdown. Designed especially for hand-held battery powered devices, the MIC5210 can be switched by a CMOS or TTL compatible logic signal, or the enable pin can be connected to the supply input for 3-terminal operation. When disabled, power consumption drops nearly to zero. Dropout ground current is minimized to prolong battery life.
