Datasheet4U Logo Datasheet4U.com

PD69200 - PoE PSE Controller

General Description

9 3.1.

Pin Configuration and Pinout9 3.2.

Key Features

  • The following is the list of feature details of PSE Controller devices.
  • Complies with IEEE 802.3 af/at, IEEE 802.3 bt, and HDBaseT (POH) standards.
  • Port matrix and priority.
  • Cascade up to 12 PoE devices for 48 logical ports.
  • 45 W maximum two pair power and capable of 90 W per four pair port (. bt).
  • Supports three power management modes: Class (LLDP), Dynamic, and Static.
  • Supports 16 power banks based on four power supplies.
  • Port powe.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
PD69200 8-Port PSE PoE Manager and PSE PoE Controller Microsemi
PD69208M 8-Port PSE PoE Manager and PSE PoE Controller Microsemi
PD69208T4 8-Port PSE PoE Manager and PSE PoE Controller Microsemi
PD69008 8 Ports Power Over Ethernet Manager Microsemi
PD69012 12 Ports Power Over Ethernet Manager Microsemi

Other Datasheets by Microchip Technology

Part Number Description
PD69201 1-Port PSE PoE Manager
PD69204T4 PoE PSE Manager
PD69208M PoE PSE Manager
PD69208T4 PoE PSE Manager
PD69210 PoE PSE Controller

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
PoE PSE Controller PD69200 Introduction The Microchip family of PSE controllers include the PD69200, PD69210, and PD69220 devices. The PD69200 controller is based on the NXP Kinetis® L family, MKL15Z128VFM4. The PD69210 and PD69220 are based on the Microchip SAM D21 family. The PD69200 and PD69220 are pin compatible with an identical feature set. The PD69200 is available for existing designs. The PD69210 and PS69220 are recommended for all new designs. When paired with the Microchip PD69208T4, PD69204T4, or PD69208M Managers, the PD69200 controller is part of a Power over Ethernet Power Source Equipment (PSE) system. This system enables designers to integrate enhanced mode PoE capabilities, as specified in IEEE® 802.3af, IEEE 802.3at, IEEE 802.3bt, and PoH standards.