PIC16F1778
PIC16F1778 is 8-Bit Flash Microcontroller manufactured by Microchip Technology.
- Part of the PIC16F1777 comparator family.
- Part of the PIC16F1777 comparator family.
Description
PIC16(L)F1777/8/9 microcontrollers feature a high level of integration of intelligent analog and digital peripherals for a wide range of applications, such as lighting, power supplies, battery charging, motor control and other general purpose applications. These devices deliver multiple op amps, 5-/10-bit DACs, high-speed parators, 10-bit ADC, 10-/16-bit PWMs, programmable ramp generator (PRG) and other peripherals that can be connected internally to create closedloop systems without using pins or the printed circuit board (PCB) area. The 10-/16-bit PWMs, digital signal modulators and tri-state output op amp can be used together to create a LED dimming engine for lighting applications. The peripheral pin select (PPS) functionality provides flexibility, eases PCB layout and peripheral utilization by allowing digital peripheral pin mapping to an I/O.
Core Features
- C piler Optimized RISC Architecture
- Only 49 Instructions
- Operating Speed:
- DC
- 32 MHz clock input
- 125 ns minimum instruction cycle
- Interrupt Capability
- 16-Level Deep Hardware Stack
- Five 8-Bit Timers
- Three 16-Bit Timers
- Low-Current Power-on Reset (POR)
- Configurable Power-up Timer (PWRT)
- Brown-out Reset (BOR) with Selectable Trip Point
- Extended Watchdog Timer (EWDT):
- Low-power 31 k Hz WDT
- Software selectable prescaler
- Software selectable enable
Memory
- Up to 28 Kbytes Program Flash Memory (PFM)
- Up to 2 Kbytes Data RAM
- Direct, Indirect and Relative Addressing modes
- High-Endurance Flash (HEF):
- 128B of nonvolatile data storage
- 100K Erase/Write cycles
Operating Characteristics
- Operating Voltage Range:
- 1.8V to 3.6V (PIC16LF1777/8/9)
- 2.3V to 5.5V (PIC16F1777/8/9)
- Temperature Range:
- Industrial: -40°C to 85°C
- Extended: -40°C to 125°C e Xtreme Low-Power (XLP) Features
- Sleep mode: 50 n A @ 1.8V, typical
- Watchdog Timer: 500 n A @ 1.8V, typical
- Secondary Oscillator: 500 n A @ 32 k Hz
- Operating Current:
- 8 u A @ 31 k Hz, 1.8V, typical
- 32 u A/MHz @...