PIC18F26Q10 Datasheet | Microchip Technology

Description PIC18F26/45/46Q10 microcontrollers feature Analog, Core Independent, and munication Peripherals for a wide range of general purpose and low-power applications. These 28/40/44 -pin devices are equipped with a 10-bit ADC with putation (ADC2) automating Capacitive Voltage Divider (CVD) techniques for advanced touch sensing, averaging, filtering, oversampling and performing automatic threshold parisons. They also offer a set of Core Independent Peripherals such as plementary Waveform Generator (CWG), Windowed Watchdog Timer (WWDT), Cyclic Redundancy Check (CRC)/ Memory Scan, Zero-Cross Detect (ZCD), Configurable Logic Cell (CLC), and Peripheral Pin Select (PPS), providing for increased design flexibility and lower system cost. Core Features - C piler Optimized RISC Architecture - Operating Speed: - DC - 64 MHz clock input over the full VDD range - 62.5 ns minimum instruction cycle - Programmable 2-Level Interrupt Priority - 31-Level Deep Hardware Stack - Three 8-Bit Timers (TMR2/4/6) with Hardware Limit Timer (HLT) - Four 16-Bit Timers (TMR0/1/3/5) - Low-Current Power-on Reset (POR) - Power-up Timer (PWRT) - Brown-out Reset (BOR) - Low-Power BOR (LPBOR) Option - Windowed Watchdog Timer (WWDT): - Watchdog Reset on too long or too short interval between watchdog clear events - Variable prescaler selection - Variable window size selection - All sources configurable in hardware or software Memory - Up to 64K Bytes Program Flash Memory - Up to 3615 Bytes Data SRAM Memory - Up to 1024 Bytes Data EEPROM - Programmable Code Protection © 2018 Microchip Technology Inc. Datasheet Preliminary DS40001996A-page 1 PIC18F26/45/46Q10 - Direct, Indirect and Relative Addressing modes Operating Characteristics - Operating Voltage Range: - 1.8V to 5.5V - Temperature Range: - Industrial: -40°C to 85°C - Extended: -40°C to 125°C Power-Saving Operation Modes - Doze: CPU and Peripherals Running at Different Cycle Rates (typically CPU is...