Datasheet4U Logo Datasheet4U.com

PL130-07 - High Speed Translator Buffer to LVCMOS

General Description

The PL130-07 is a low cost, high performance, high speed, buffer that reproduces any input frequency from 10 MHz to 200 MHz.

It provides an LVCMOS output with 15 pF output load drive capability.

Any input signal with at least 100 mV swing can be used as reference signal.

Key Features

  • LVCMOS Output.
  • Selectable Drive Capability - Drive 15 pF or 30 pF Output Load.
  • Single AC-Coupled Input (Min. 100 mV Swing).
  • Accepts LVCMOS or Sine Wave Inputs.
  • Input Range from 10 MHz to 200 MHz.
  • OE High (PL130-07) or OE Low (PL130-07A) Enable.
  • 2.5V to 3.3V Operation.
  • Available in 8-Pin SOIC, 8-Pin TSSOP and 3 mm x 3 mm 16-Pin QFN General.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
PL130-00 Selectable High Speed Translator Buffer to CMOS PhaseLink
PL130-05 High Speed Translator Buffer to PECL Micrel
PL130-09 High Speed Translator Buffer to LVDS Micrel
PL130-58 High Speed Translator Buffer to PECL Micrel
PL13 (PL13 / PL15 Series) DFB Laser Diode Modules PD-LD

Other Datasheets by Microchip Technology

Part Number Description
PL138-48 1:4 Differential PECL Fanout Buffer

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
PL130-07 High Speed Translator Buffer to LVCMOS Features • LVCMOS Output • Selectable Drive Capability - Drive 15 pF or 30 pF Output Load • Single AC-Coupled Input (Min. 100 mV Swing) • Accepts LVCMOS or Sine Wave Inputs • Input Range from 10 MHz to 200 MHz • OE High (PL130-07) or OE Low (PL130-07A) Enable • 2.5V to 3.3V Operation • Available in 8-Pin SOIC, 8-Pin TSSOP and 3 mm x 3 mm 16-Pin QFN General Description The PL130-07 is a low cost, high performance, high speed, buffer that reproduces any input frequency from 10 MHz to 200 MHz. It provides an LVCMOS output with 15 pF output load drive capability. Any input signal with at least 100 mV swing can be used as reference signal. This chip is ideal for conversion from sine wave to LVCMOS.