SAML11E15
Key Features
- Operating Conditions: 1.62V to 3.63V, -40ºC to +125ºC, DC to 32 MHz
- Core: 32 MHz (2.64 CoreMark/MHz and up to 31 DMIPS) Arm® Cortex®-M23 with: - Single-cycle hardware multiplier - Hardware divider - Nested Vector Interrupt Controller (NVIC) - Memory Protection Unit (MPU) - Stack Limit Checking - TrustZone® for ARMv8-M (optional)
- System - Power-on Reset (POR) and programmable Brown-out Detection (BOD) - 8-channel Direct Memory Access Controller (DMAC) - 8-channel event system for Inter-peripheral Core-independent Operation - CRC-32 generator
- Memory - 16/32/64-KB Flash - 4/8/16-KB SRAM - 2-KB Data Flash Write-While-Read (WWR) section for non-volatile data storage - 256 bytes TrustRAM with physical protection features
- Clock Management - Flexible clock distribution optimized for low power - 32.768 kHz crystal oscillator - 32.768 kHz ultra low-power internal RC oscillator - 0.4 to 32 MHz crystal oscillator - 16/12/8/4 MHz low-power internal RC oscillator - Ultra low-power digital Frequency-Locked Loop (DFLLULP) - 32-96 MHz fractional digital Phase-Locked Loop (FDPLL96M) - One frequency meter
- Low-Power and Power Management - Active, Idle, Standby with partial or full SRAM retention and off sleep modes:
- Active mode (< 25 μA/MHz)
- Idle mode (< 10 μA/MHz) with 1.5 μs wake-up time
- Standby with Full SRAM Retention (0.5 μA) with 5.3 μs wake-up time
- Off mode (< 100 nA) Data Sheet © 2023 Microchip Technology Inc. and its subsidiaries
