Microchip Technology SST25VF016B
The SST25VF016B devices are enhanced with improved operating frequency and even lower power consumption than the original SST25VFxxxA devices. The split-gate cell design and thick-oxide tunneling injector attain better reliability and manufacturability compared with alternate approaches. The devices write (Program or Erase) with a single power supply of 2.7-3.6V for SST25VF016B.| Part No. | SST25VF016B |
|---|---|
| Datasheet | SST25VF016B Download |
| Manufacturer |  Microchip Technology |
| Description | 16 Mbit SPI Serial Flash |
| Buy | Stock & Price |
FEATURES
● Single Voltage Read and Write Operations - 2.7-3.6V● Serial Interface Architecture - SPI Compatible: Mode 0 and Mode 3
● High Speed Clock Frequency - Up to 50 MHz
● Superior Reliability - Endurance: 100,000 Cycles (typical) - Greater than 100 years Data Retention
● Low Power Consumption: - Active Read Current: 10 mA (typical) - Standby Current: 5 µA (typical)
● Flexible Erase Capability - Uniform 4 KByte sectors - Uniform 32 KByte overlay blocks - Uniform 64 KByte overlay blocks
● Fast Erase and Byte-Program: - Chip-Erase Time: 35 ms (typical) - Sector-/Block-Erase Time: 18 ms (typical) - Byte-Program Time: 7 µs (typical)
● Auto Address Increment (AAI) Programming - Decrease total chip programming time over Byte-Program operations
● End-of-Write Detection - Software polling the BUSY bit in Status Register - Busy Status readout on SO pin in AAI Mode
● Hold Pin (HOLD#) - Suspends a serial sequence to the memory without deselecting the device
● Write Protection (WP#) - Enables...
