Microchip Technology TC962
The TC962 is an advanced version of the industry standard TC7662 high voltage DC-to-DC converter. The output impedance of the device is a low 28Ω (with the proper capacitors), voltage conversion efficiency is 99.9%, and power conversion efficiency is 97%. The low voltage terminal (pin 6) required in some TC7662 applications has been eliminated.| Part No. | TC962 |
|---|---|
| Datasheet | TC962 Download |
| Manufacturer |  Microchip Technology |
| Description | High Current Charge Pump DC-to-DC Converter |
| Buy | Stock & Price |
FEATURES
●●
●
●
●
●
●
● TC962
GENERAL DESCRIPTION
Using improved design techniques and CMOS construction, the TC962 can source as much as 80mA versus the 7662’s 20mA capability. As an inverter, the TC962 can put out voltages as high as 18V and as low as 3V without the need for external diodes. Grounding this terminal will double the oscillator frequency from 12kHz to 24kHz. This will allow the use of smaller capacitors for the same output current and ripple, in most applications. Only two external capacitors are required for inverter applications. In the event an external clock is needed to drive the TC962 (such as paralleling), driving this pin directly will cause the internal oscillator to sync to the external clock. Pin 1, which is used as a test pin on the 7662, is a voltage reference zener on the TC962. This zener (6.4V at 5mA) has a dynamic impedance of 12Ω and is intended for use where the TC962 is supplying current to external regulator circuitry and a reference is needed for the regulator circuit. (See Section 3.0APPLICATIONS
Information).
