Microchip Technology USB2502
2-Port USB 2.0 Hub Controller
USB2502 2-Port USB 2.0 Hub Controller Highlights
● Integrated USB 2.0 Compatible 2-Port Hub - High-Speed (480Mbits/s), Full-Speed (12Mbits/s) and Low-Speed (1.5Mbits/s) compatible - Full power management with ganged power control - Detects Bus-Power/Self-Power source and changes mode automatically
● Complete USB Specification 2.0 Compatibility - Includes USB 2.0 Transceivers
● VID/PID/DID, and Port Configuration for Hub via: - Single Serial I2C EEPROM - SMBus Slave Port
● Default VID/PID/DID, allows functionality when configuration EEPROM is absent
● Hardware Strapping options allow for configuration without an external EEPROM or SMBus Host
● On-Board 24MHz Crystal Driver Circuit or 24 MHz external clock driver
● Internal PLL for 480MHz USB 2.0 Sampling
● Internal 1.8V Linear Voltage Regulator
● Integrated USB termination and Pull-up/Pull-down resistors
● Internal Short Circuit protection of USB differential signal pins
● Basic single-color LED support
● 1.8 Vol
● Integrated USB 2.0 Compatible 2-Port Hub - High-Speed (480Mbits/s), Full-Speed (12Mbits/s) and Low-Speed (1.5Mbits/s) compatible - Full power management with ganged power control - Detects Bus-Power/Self-Power source and changes mode automatically
● Complete USB Specification 2.0 Compatibility - Includes USB 2.0 Transceivers
● VID/PID/DID, and Port Configuration for Hub via: - Single Serial I2C EEPROM - SMBus Slave Port
● Default VID/PID/DID, allows functionality when configuration EEPROM is absent
● Hardware Strapping options allow for configuration without an external EEPROM or SMBus Host
● On-Board 24MHz Crystal Driver Circuit or 24 MHz external clock driver
● Internal PLL for 480MHz USB 2.0 Sampling
● Internal 1.8V Linear Voltage Regulator
● Integrated USB termination and Pull-up/Pull-down resistors
● Internal Short Circuit protection of USB differential signal pins
● Basic single-color LED support
● 1.8 Vol