MT29F1G08ABCHC Overview
Key Specifications
Mount Type: Surface Mount
Pins: 63
Operating Voltage: 1.8 V
Max Voltage (typical range): 1.95 V
Key Features
- Open NAND Flash Interface (ONFI) 1.0-compliant1
- Single-level cell (SLC) technology
- Asynchronous I/O performance – tRC/tWC: 25ns (3.3V), 35ns (1.8V)
- Array performance – Read page: 25µs – Program page: 250µs (TYP, 3.3V) – Program page: 250µs (TYP, 1.8V) – Erase block: 500µs (TYP)
- Command set: ONFI NAND Flash Protocol
- Operation status byte provides software method for detecting – Operation completion – Pass/fail condition – Write-protect status
- Internal data move operations supported within the device from which data is read
- Ready/busy# (R/B#) signal provides a hardware method for detecting operation completion
- WP# signal: write protect entire device
- Blocks 0–7 (block address 00h-07h) guaranteed to be valid with ECC when shipped from factory (3.3V only); see Error Management (page 83)
