MT29F32G08AFACA Overview
Key Specifications
Package: TFSOP
Mount Type: Surface Mount
Pins: 48
Operating Voltage: 3.3 V
Key Features
- Open NAND Flash Interface (ONFI) 2.2-compliant1
- Single-level cell (SLC) technology
- Synchronous I/O performance – Up to synchronous timing mode 5 – Clock rate: 10ns (DDR) – Read/write throughput per pin: 200 MT/s
- Asynchronous I/O performance – Up to asynchronous timing mode 5 – tRC/tWC: 20ns (MIN)
- Array performance – Read page: 35µs (MAX) – Program page: 350µs (TYP) – Erase block: 1.5ms (TYP)
- Command set: ONFI NAND Flash Protocol
- First block (block address 00h) is valid when shipped from factory. For minimum required ECC, see Error Management (page 100)
- RESET (FFh) required as first command after power-on
- Operation status byte provides software method for detecting – Operation completion – Pass/fail condition – Write-protect status
- Data strobe (DQS) signals provide a hardware method for synchronizing data DQ in the synchronous interface
