Datasheet4U Logo Datasheet4U.com

ME2186 - Synchronous PFM Step-up DC/DC Converter

General Description

ME2186 Series is a Synchronous PFM Step-up DC/DC converter IC with low supply current by CMOS process.

Key Features

  • Low ripple and low noise.
  • Operating voltage range：0.9V~6.0V.
  • Output voltage range：1.8V~6.0V(step 0.1V).
  • Output voltage accuracy：±2%.
  • Output Current：If VIN=3.0V and VOUT=5.0V,then IOUT=500mA.
  • Low start voltage：≤0.9V(at IOUT =1mA).
  • Maximum oscillator frequency：330KHz (TYP. ME2186A50).
  • Package：SOT23-3，SOT89-3 ME2186Xxx with only three external components. Also available is a CE (chip enable) function that reduce power dissipation during shut-down mode. ME21.

📥 Download Datasheet

Datasheet Details

Part number ME2186
Manufacturer Microne
File Size 271.52 KB
Description Synchronous PFM Step-up DC/DC Converter
Datasheet download datasheet ME2186 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
ME2108 PFM Step-up DC/DC Converter ChipSourceTek
ME2113B BLUE SIDE BACKLIGHT Micro Electronics
ME2149 ULTRA-SMALL PACKAGE PWM/PFM SWITCHING CONTROL STEP-UP SWITCHING REGULATOR ChipSourceTek
ME2159 1A Step-Up Current Mode PWM Converter ChipSourceTek
ME2169 PWM/PFM switch controller ChipSourceTek

Other Datasheets by Microne

Part Number Description
ME2186Axx Synchronous PFM Step-up DC/DC Converter
ME2182 1.2MHz Synchronous Step-Up DC/DC Controller
ME2183 1.0MHZ Synchronous Step-Up DC/DC Converter
ME2188 PFM step-up DC-DC converter
ME2100 DC / DC boost converter

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
ME2186 Synchronous PFM Step-up DC/DC Converter, ME2186 Series General Description ME2186 Series is a Synchronous PFM Step-up DC/DC converter IC with low supply current by CMOS process. High frequency noise that occurs during switching is reduced by using advanced circuit designed, output voltage is programmable in 0.1V steps between 1.8~6.0V.A low ripple, high efficiency step-up DC/DC converter can be constructed of Features  Low ripple and low noise  Operating voltage range：0.9V~6.0V  Output voltage range：1.8V~6.0V(step 0.1V)  Output voltage accuracy：±2%  Output Current：If VIN=3.0V and VOUT=5.0V,then IOUT=500mA  Low start voltage：≤0.9V(at IOUT =1mA)  Maximum oscillator frequency：330KHz (TYP. ME2186A50)  Package：SOT23-3，SOT89-3 ME2186Xxx with only three external components.