Datasheet4U Logo Datasheet4U.com

ME301C - DC-DC Converter

Key Features

  • Ultra low ripple and noise；.
  • Low input current：6µA(Type)；.
  • Operating voltage range：0.9V~6.5V；.
  • Output voltage range：2.0V~7.0V(step 0.1V)；.
  • Output voltage accuracy：±2.5%；.
  • Output Current：if Vin=3.0V and Vout=3.3V，then Iout=250mA；.
  • Low start voltage：≤0.9V( at Iout=1mA)；.
  • Maximum oscillator frequency： 100KHz(Typ. )；.
  • High Efficiency：85%(Type)；.

📥 Download Datasheet

Datasheet Details

Part number ME301C
Manufacturer Microne
File Size 276.08 KB
Description DC-DC Converter
Datasheet download datasheet ME301C Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
ME3-ETO Electrochemical Sensor Winsen
ME3-HF Electrochemical Sensor Winsen
ME3-NO2 Electrochemical Gas Sensor Winsen
ME3102 1A Synchronous Buck DC-DC Converter ChipSourceTek
ME3108 2A COT fast response synchronous buck DC/DC converter ChipSourceTek

Other Datasheets by Microne

Part Number Description
ME3101 500mA Synchronous Step-Down DC/DC Converters
ME3101A10 500mA Synchronous Step-Down DC/DC Converters
ME3101A12 500mA Synchronous Step-Down DC/DC Converters
ME3101A18 500mA Synchronous Step-Down DC/DC Converters
ME3101A33 500mA Synchronous Step-Down DC/DC Converters

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MExx1C Series Ver 02 MExx1C Series DC-DC Converter MExx1C Series is a VFM Step-up DC/DC converter IC with ultra-low supply current by CMOS process. High frequency noise that occurs during switching is reduced by using advanced circuit designed, output voltage is programmable in 0.1V steps between 2.0~7.0V. A low ripple, high efficiency step-up DC/DC converter for MExx1C can be constructed of with only three external components. Also available is a CE(chip enable) function that reduce power dissipation During shut-down mode., and an independent Vdd pin function (separated power supply and voltage detect pins) for fly-back circuits. MExx1Cx is suitable for use with battery-powered instruments with low noise and ultra low supply current; Ext function can use for large output circuit.