Datasheet4U Logo Datasheet4U.com

ME8200 - Current Mode PWM Controller

General Description

ME8200 is a highly integrated current mode PWM control IC optimized for high performance, low standby power and cost effective offline flyback converter applications in sub 30W range.

PWM switching frequency at normal operation is externally programmable and trimmed to tight range.

Key Features

  • Frequency Shuffling Technology for Improved EMI Performance.
  • Extended Burst Mode Control For Improved Efficiency and Minimum Standby Power Design.
  • Audio Noise Free Operation.
  • External Programmable PWM Switching Frequency.
  • Internal Synchronized Slope Compensation.
  • Low VDD Startup Current and Low Operating Current (1.4mA).
  • Leading Edge Blanking on Current Sense Input.
  • Good Protection Coverage With Auto Self-Recovery o.
  • VDD Over Voltage Clamp and Under.

📥 Download Datasheet

Datasheet Details

Part number ME8200
Manufacturer Microne
File Size 589.85 KB
Description Current Mode PWM Controller
Datasheet download datasheet ME8200 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
ME8204 40W power management control IC Zhenhua Lingyun Technology
ME8205E Dual N-Channel MOSFET Matsuki
ME8205E-G Dual N-Channel MOSFET Matsuki
ME80N08 N-Channel 80-V (D-S) MOSFET Matsuki
ME80N08-G N-Channel 80-V (D-S) MOSFET Matsuki

Other Datasheets by Microne

Part Number Description
ME8202 Current Mode PWM Controller
ME8203 High-Performance Current Mode PWM Switching Power Supply Controller
ME8204 Current Mode PWM Controller
ME8100 HIGH PERFORMANCE OFF-LINE CONTROLLER
ME8101 High Performance Current Mode PWM switching power supply controller

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
ME8200 Current Mode PWM Controller With Frequency Shuffling ME8200 General Description ME8200 is a highly integrated current mode PWM control IC optimized for high performance, low standby power and cost effective offline flyback converter applications in sub 30W range. PWM switching frequency at normal operation is externally programmable and trimmed to tight range. At no load or light load condition, the IC operates in extended ‘burst mode’ to minimize switching loss. Lower standby power and higher conversion efficiency is thus achieved.VDD low startup current and low operating current contribute to a reliable power on startup design with ME8200. A large value resistor could thus be used in the startup circuit to minimize the standby power.