SMS15 Datasheet | Microsemi

SCRIPTION This 6 pin 4 line unidirectional array is designed for use in applications where protection is required at the board level from voltage transients caused by electrostatic discharge (ESD) as defined by IEC 61000-4-2, electrical fast transients (EFT) per IEC 61000-4-4 and effects of secondary lighting. These arrays are used to protect 4 discrete lines utilizing pins (1,3,4,6) with a mon anode (pins 2,5) configuration. The SMS03 thru SMS24 product provides board level protection from static electricity and other induced voltage surges that can damage sensitive circuitry. These Transient Voltage Suppressor (TVS) diode arrays protect 3.0/3.3 volt ponents such as DRAM’s SRAM’s CMOS, HCMOS, HSIC, and low voltage interfaces up to 24 volts. Because of the physical size, weight and protection capabilities, this product is ideal for use in but not limited to miniaturized electronic equipment such as hand held instruments, puters, puter peripherals and cell phones. IMPORTANT: For the most current data, consult MICROSEMI’s website: http://.microsemi. T V S array™ S E R I E S W W W . Microsemi . APPLICATIONS - - - EIA-RS232 data rates 19.6kbs EIA-RS422 data rates 10Mbs EIA-RS423 data rates 100kbs Features - - - - Protects 3.0/3.3 up through 24 volt ponents Protects 4 unidirectional lines Provides electrically isolated protection SOT 23-6L Packaging - - PACKAGING Tape & Reel per EIA Standard 481 3,000 pieces per 7 inch reel MAXIMUM RATING S - - - - Operating Temperature: -55°C to +150°C Storage Temperature: -55°C to +150°C Peak Pulse power 200 watts (8/20 µs Figure 1) SOT 23-6L Packaging - - - - MECHANICAL Molded SOT23-6L Surface Mount Weight .014 grams (approximate) Body Marked with device number Part is symmetrical therefore pin one can be defined as either one of the four corner pins (for clarification see schematic on page 2) ELECTRICAL CHARACTERISTICS PER LINE @ 25°C Unless otherwise specified STAND OFF VOLTAGE VWM VOLTS MAX SMS03 SMS05 SMS12 SMS15 SMS24...