1N4692 Datasheet | Microsemi

.Microsemi . SCOTTSDALE DIVISION 1N4678 thru 1N4717-1 DO-7 500 m W AXIAL-LEADED ZENER DIODES DESCRIPTION The 1N4678 thru 1N4717 series of 0.5 watt Zener Voltage Regulators provides a selection from 1.8 to 43 volts in standard 5% tolerances as well as tighter tolerances identified by different suffix letters on the part number. These glass axial-leaded DO-7 Zeners also have an internal-metallurgicalbond similar to other military requirements for these packages. Microsemi also offers numerous other Zener products to meet higher and lower power applications. APPEARANCE DO-7 (DO-204AA) IMPORTANT: For the most current data, consult MICROSEMI’s website: http://.microsemi. Features - JEDEC registered 1N4678 thru 1N4717 - Internally solder bonded - Options for screening in accordance with MIL-PRF19500 for JAN, JANTX, JANTXV, and JANS are available by adding MQ, MX, MV, or MSP prefixes respectively to part numbers as well as “-1” suffix - Surface Mount available in DO-213AA package outline by adding a UR or UR-1 (see separate data sheet for 1N4678UR thru 1N4717UR-1) - DO-35 glass body axial-leaded Zener equivalents are also available (see separate data sheet) APPLICATIONS / BENEFITS - Regulates voltage over a broad operating current and temperature range - Guaranteed maximum voltage regulation 10 µA to 100 µA - Voltage selection from 1.8 to 43 V - Standard voltage tolerances are plus/minus 5% with no suffix - Tight tolerances available in plus or minus 2% or 1% with C or D suffix respectively - Flexible axial-lead mounting terminals - Nonsensitive to ESD per MIL-STD-750 Method 1020 - Capacitance also specified (see Figure 3) - Inherently radiation hard as described in Microsemi Micro Note 050 MAXIMUM RATINGS - Operating and Storage temperature: -65ºC to +175ºC - Thermal Resistance: 300 ºC/W junction to lead at 3/8 (10 mm) lead length from body, or 360ºC/W junction to ambient when mounted on FR4 PC board (1 oz Cu) with 4 mm2 copper pads and track width 1...