Datasheet4U Logo Datasheet4U.com

1N6356 - 1500W LOW CLAMPING FACTOR TRANSIENT VOLTAGE SUPPRESSOR

Description

This Transient Voltage Suppressor (TVS) series for 1N6356 thru 1N6372 are JEDEC registered selections for both unidirectional and bidirectional devices.

📥 Download Datasheet

Datasheet preview – 1N6356

Datasheet Details

Part number 1N6356
Manufacturer Microsemi
File Size 138.02 KB
Description 1500W LOW CLAMPING FACTOR TRANSIENT VOLTAGE SUPPRESSOR
Datasheet download datasheet 1N6356 Datasheet
Additional preview pages of the 1N6356 datasheet.

📁 Similar Datasheet

  • 1N6356 - Transient Voltage Suppressor (Digitron Semiconductors)
  • 1N6350 - 500mW GLASS ZENER DIODES (Digitron Semiconductors)
  • 1N6350 - ZENER 500mW VOLTAGE REGULATOR (SENSITRON SEMICONDUCTOR)
  • 1N6350US - (1N6309US - 1N6355US) VOIDLESS-HERMETICALLY-SEALED Surface Mount (Microsemi Corporation)
  • 1N6350US - ZENER 500mW VOLTAGE REGULATOR (SENSITRON SEMICONDUCTOR)
  • 1N6351 - 500mW GLASS ZENER DIODES (Digitron Semiconductors)
  • 1N6351 - ZENER 500mW VOLTAGE REGULATOR (SENSITRON SEMICONDUCTOR)
  • 1N6351US - (1N6309US - 1N6355US) VOIDLESS-HERMETICALLY-SEALED Surface Mount (Microsemi Corporation)
  • 1N6351US - ZENER 500mW VOLTAGE REGULATOR (SENSITRON SEMICONDUCTOR)
  • 1N6352 - 500mW GLASS ZENER DIODES (Digitron Semiconductors)
Other Datasheets by Microsemi
  • 1N6350 - 500mW GLASS ZENER DIODES
  • 1N6350C - 500mW GLASS ZENER DIODES
  • 1N6350D - 500mW GLASS ZENER DIODES
  • 1N6351 - 500mW GLASS ZENER DIODES
  • 1N6351C - 500mW GLASS ZENER DIODES
  • 1N6351D - 500mW GLASS ZENER DIODES
  • 1N6352 - 500mW GLASS ZENER DIODES
  • 1N6352C - 500mW GLASS ZENER DIODES

Full PDF Text Transcription

Click to expand full text
SCOTTSDALE DIVISION 1N6356 thru 1N6372, e3 or MPT-5 thru MPT-45C, e3 1500 W LOW CLAMPING FACTOR TRANSIENT VOLTAGE SUPPRESSOR WWW.Microsemi .COM DESCRIPTION APPEARANCE This Transient Voltage Suppressor (TVS) series for 1N6356 thru 1N6372 are JEDEC registered selections for both unidirectional and bidirectional devices. The 1N6356 thru 1N6364 are unidirectional and the 1N6365 thru 1N6372 are bi-directional where they all provide a very low specified clamping factor for minimal clamping voltages (VC) above their respective breakdown voltages (VBR) as specified herein. They are most often used in protecting sensitive components from inductive switching transients or induced secondary lightning effects as found in lower surge levels of IEC61000-4-5 .
Published: |