1N6373 - 1500 WATT LOW CLAMPING FACTOR TRANSIENT VOLTAGE SUPPRESSOR

Microsemi (now Microchip Technology)

General Description

This Transient Voltage Suppressor (TVS) series for 1N6373 thru 1N6389 are JEDEC registered selections for both unidirectional and bidirectional devices.

📥 Download Datasheet

1N6373 1500 watt low clamping factor transient voltage suppressor by Microsemi (now Microchip Technology) - Datasheet Preview

Datasheet Details

Part number	1N6373
Manufacturer	Microsemi (now Microchip Technology)
File Size	169.78 KB
Description	1500 WATT LOW CLAMPING FACTOR TRANSIENT VOLTAGE SUPPRESSOR
Datasheet	1N6373 Datasheet

📁 Similar Datasheet

Part Number	Description	Manufacturer
1N6373	1500 Watt Peak Power Mosorb Zener Transient Voltage Suppressors	ON Semiconductor
1N6373	GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR STANDOFF VOLTAGE- 5.0 to 45.0V 1500 Watt Peak Power	ETC
1N6373	TVS Diodes	Littelfuse
1N6373	Transient Voltage Suppressors	Vishay
1N6373	GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR	MDE

Other Datasheets by Microsemi (now Microchip Technology)

Part Number	Description
1N6370	1500 Watt Low Clamping Factor Transient Voltage Suppressor
1N6371	1500 Watt Low Clamping Factor Transient Voltage Suppressor
1N6372	1500 Watt Low Clamping Factor Transient Voltage Suppressor
1N6374	1500 WATT LOW CLAMPING FACTOR TRANSIENT VOLTAGE SUPPRESSOR
1N6375	1500 WATT LOW CLAMPING FACTOR TRANSIENT VOLTAGE SUPPRESSOR

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text

SCOTTSDALE DIVISION 1N6373 thru 1N6389, e3 or MPTE-5 thru MPTE-45C, e3 1500 WATT LOW CLAMPING FACTOR TRANSIENT VOLTAGE SUPPRESSOR WWW.Microsemi .COM DESCRIPTION APPEARANCE This Transient Voltage Suppressor (TVS) series for 1N6373 thru 1N6389 are JEDEC registered selections for both unidirectional and bidirectional devices. The 1N6373 thru 1N6381 are unidirectional and the 1N6382 thru 1N6389 are bi-directional where they all provide a very low specified clamping factor for minimal clamping voltages (VC) above their respective breakdown voltages (VBR) as specified herein. They are most often used in protecting sensitive components from inductive switching transients or induced secondary lightning effects as found in lower surge levels of IEC61000-4-5 .