Microsemi DRF1300
The DRF1300 is a push-pull hybrid containing two high power gate IN drivers and two power MOSFETs. It was designed to provide the sys- S tem designer increased flexibility, higher performance, and lowered cost D over a non-integrated solution. This low parasitic approach, coupled with the Schmitt trigger input, Kelvin signal ground, Anti-Ring function IN Invert and Non-invert select pin provide improved stability and control in DRIVER 30A S MOSFETS Kilowatt to Multi-Kilowatt, High Frequency ISM applications.| Part No. | DRF1300 |
|---|---|
| Datasheet | DRF1300 Download |
| Manufacturer |  Microsemi |
| Description | MOSFET |
| Buy | Stock & Price |
FEATURES
● Switching Frequency: DC TO 30MHz● Inverting Non-Inverting Select
● Low Pulse Width Distortion
● Single Power Supply (Per Section)
● 1V CMOS Schmitt Trigger Input 1V Hysteresis
● Switching Speed 3-4ns
● BVds = 500V
● Ids = 30A max. Per-section
● Rds(on) ≤ .24 Ohm
● PD = 550W Per-section
● RoHS Compliant
TYPICAL APPLICATIONS
● Class C, D and E RF Generators● Switch Mode Power Amplifiers
● HV Pulse Generators
● Ultrasound Transducer Drivers
● Acoustic Optical Modulators Driver
ABSOLUTE MAXIMUM RATINGS
Symbol VDD IN, FN IO PK TJMAX Parameter Supply Voltage Input Single Voltages Output Current Peak Operating Temperature Driver Specifications Symbol VDD IN Parameter Supply Voltage Input Voltage IN(R) IN(F) IDDQ IO Ciss RIN VT(ON) VT(OFF) TDLY tr tf Input Voltage Rising Edge Input Voltage Falling Edge Quiescent Current Output Current Input Capacitance Input Parallel Resistance Input, Low to High Out (See Truth Table) Input, High to Low Out (See Truth Table) Time Delay (throughput)...
