MHP8565A Overview
The MHP series are non-isolated Point of Load switching regulators for high reliability Military and Space distributed power applications. Fully integrated, these include a buck controller, inductor, and input / output capacitors bined in a single package. They operate from an input voltage of +4.5V to +12V (See Note 1), providing step down power conversion to output voltages as low as 0.5V or lower (See Note 2).
MHP8565A Key Features
- Now available as SMD: 5962R1323601xxx
- Single 3 Amp product (Note 2)
- Efficiencies to 87%, see Figure 8
- Radiation Hard to 100K rad TID
- Single- Event results show no significant output transients through an LET of 58
- Optimized for 5V input. Consult factory for higher input voltages. (Note 1)
- Operates down to 4.5 Volts input
- Current Mode Control
- Adjustable output Voltage between 0.5V and 4V (depends on model, see table 3) (Note 2)
- Enable function available
MHP8565A Applications
- Now available as SMD: 5962R1323601xxx
