SMBG5359B Datasheet | Microsemi

DESCRIPTION The SMBJ5333-5388B or SMBG5333-5388B series of surface mount 5.0 watt Zeners provides voltage regulation in a selection from 3.3 to 200 volts with different tolerances as identified by suffix letter on the part number. It is equivalent to the JEDEC registered 1N5333 thru 1N5388B with identical electrical characteristics and testing as well as Ro HS pliant with an e3 suffix. It is available in J-bend design (SMBJ) with the DO-214AA package for greater PC board mounting density or in Gull-wing design (SMBG) in the DO-215AA for visible solder connections. These plastic encapsulated Zeners have a moisture classification of Level 1 with no dry pack required and are also available in military equivalent screening levels by adding a prefix identifier as further described in the Features section. Microsemi also offers numerous other Zener products to meet higher and lower power applications. APPEARANCE NOTE: All SMB series are equivalent to prior SMS package identifications. IMPORTANT: For the most current data, consult MICROSEMI’s website: http://.microsemi. FEATURES APPLICATIONS / BENEFITS - Surface mount equivalent to 1N5333 to 1N5388B - Ideal for high-density and low-profile mounting - Zener voltage available 3.3V to 200V - Standard voltage tolerances are plus/minus 5% with B suffix and 10 % with A suffix identification - Tight tolerances available in plus or minus 2% or 1% with C or D suffix respectively - Options for screening in accordance with MIL-PRF-19500 for JAN, JANTX, and JANTXV are available by adding MQ, MX, or MV prefixes respectively to part numbers. - Ro HS pliant devices available by adding an “e3” suffix - Regulates voltage over a broad operating current and temperature range - Wide selection from 3.3 to 200 V - Nonsensitive to ESD - Withstands high surge stresses - Minimal changes of voltage versus current as specified by voltage regulation (ΔVZ) - High specified maximum current (IZM) when adequately heat sinking - Moisture...