MMP-1525-BR-24V
MMP-1525-BR-24V is Brushed Motor Amplifier manufactured by Midwest Motion Products.
Data Sheet.in
October 2006
MMP-M1525-BR-24V Brushed Motor Amplifier Spec Sheet
Performance Characteristics Peak Power Peak Output Voltage Peak Output Current Max. Continuous Current Internal Shunt Regulator Electrical Characteristics Input Signal Voltage System Gain Input Impedance Typical Input Drift Bandwidth Dead Band Input Power Requirements Input Voltage Adjustments Peak Current Limit RMS Current Limit Signal mand Input Balance pensation Tachometer Diagnostics Bus Over Voltage Excessive RMS/Over Temp. Surge/Ground Fault Amplifier Operational 2.5 k W + 100 VDC (shut off @ 125 VDC) + 25 amps (1 sec.) + 15 amps (50C), + 19 amps (25C) 55 W Continuous, 2.4 k W peak for .02 seconds (activates at 190 VDC) + 10 VDC (typ.), + 35 VDC (max.) 0 to 10,000 amps/volt
- velocity mode 0 to 10.0 amps/volt
- torque mode 40 k Ohms 10 u V / Degree C 2 k Hz with 1.2 m H Inductance Zero 20
- 100 VDC 1 to 25 amps 1 to 19 amps Scaling Zero velocity offset System response Scaling Red LED Red LED Red LED Green LED 7.6 in. x 2.5 in. x 4.7 in. 2.4 lbs 0 C to 50 C 80 C at heat sink 5
- 95% non-condensing
Physical Characteristics
Module Dimensions (l x w x h) Weight Ambient Temperature Shutdown Temperature Relative Humidity
OPTIONS AVAILABLE MULTIAXIS CONFIGURATIONS PATIBLE POWER SUPPLIES PATIBLE SERVOMOTORS, ENCODERS AND GEARMOTORS PLETE BRUSHED AND BRUSHLESS SYSTEMS
.midwestmotion. eng@midwestmotion....
