Datasheet4U Logo Datasheet4U.com

MC2045-2 - Fiberoptic Postamplifier

General Description

The MC2045-2 is a second-generation, high gain limiting amplifier intended for fiberoptics based communications to 200Mbps.

Normally placed following the photodetector and transimpedance or pre-amplifier, the limiting amplifier provides the necessary gain to give ECL compatible logic outputs.

Key Features

  • Low-cost IC, available as die or in SOIC16, TSSOP20 and QSOP16 packages. Fabricated in advanced submicron BiCMOS process. Pin-compatible, superior replacement for Signetics NE5224/5. SONET, FDDI, ESCON compatible. Programmable input-signal level detector. Fully differential. Input sensitivity better than 0.8mV at 155Mbps, permitting system sensitivities better than -38dBm (BER 10-9). Fully supports 3.3V and 5V supplies. Differential PECL data and level detect outputs. MC2045-2 Postamplifier/Qu.

📥 Download Datasheet

Datasheet Details

Part number MC2045-2
Manufacturer Mindspeed Technologies
File Size 135.19 KB
Description Fiberoptic Postamplifier
Datasheet download datasheet MC2045-2 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MC2040 THICK FILM CHIP RESISTOR RCD
MC2002 6 SEGMENT X 7 GRID LED DRIVER ABOV
MC2002-01 Standard LCD Bona
MC2004-01 Standard LCD Bona
MC2004-06 Standard LCD Bona

Other Datasheets by Mindspeed Technologies

Part Number Description
MC2045-3 Postamplifier
MC2046-2 25Gbps Limiting Amplifier

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Fiberoptic Postamplifier Main Features Low-cost IC, available as die or in SOIC16, TSSOP20 and QSOP16 packages. Fabricated in advanced submicron BiCMOS process. Pin-compatible, superior replacement for Signetics NE5224/5. SONET, FDDI, ESCON compatible. Programmable input-signal level detector. Fully differential. Input sensitivity better than 0.8mV at 155Mbps, permitting system sensitivities better than -38dBm (BER 10-9). Fully supports 3.3V and 5V supplies. Differential PECL data and level detect outputs. MC2045-2 Postamplifier/Quantiser for applications to 200Mbps General Description The MC2045-2 is a second-generation, high gain limiting amplifier intended for fiberoptics based communications to 200Mbps.