JSW6-33DR Datasheet | Mini-Circuits

SP6T RF Switch 50Ω 10 to 2700 MHz High Power 3W The Big Deal - High Port count in super small size - Single Positive Supply Voltage, 2.5 - 4.8V - High Power P0.1d B, 3W typ. - Low Insertion Loss, 0.6 d B at 1 GHz JSW6-33DR+ CASE STYLE: MT1817 Product Overview JSW6-33DR+ is a high power reflective SP6T RF switch, with reflective short on output ports in the off condition. Made using Silicon-on-Insulator process, it has very high IP3, a built-in CMOS driver and negative voltage generator. Its tiny 2x2mm, 14-lead case enables wideband performance in tight spaces and dense PCB layouts. Key Features Feature Wideband operation 10-2700 MHz High IIP3: 55 d Bm typ. Low Loss, 0.6 d B at 1 GHz High input power, 3W Built in negative voltage generator Advantages Enables a single ponent to be used in a vast array of applications from VHF up to 2.7 GHz. Results in little or negligible inter-modulation generation, meeting requirements for digital munication signals. Low loss and high power capability enable a single switch to be used for a variety of applications, saving inventory. Operates with a single positive supply voltage; no need for DC blocking capacitors, unless external DC is present at the RF ports. Built-in CMOS driver Tiny MCLP package 2 x 2mm, 14-lead No need for external driver, saving PCB space and cost. Provides low inductance, repeatable transitions, and excellent thermal contact to PCB. Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of...