DES9066101AC Datasheet | Mitel Networks Corporation

SP8802 3.3GHz ÷ 2 fixed Modulus Divider Advance Information DS2111 Issue 7.2 June 1999 Features q q q q q q q q Very High Speed Operation 3.3GHz Silicon Technology for low Phase Noise (Typically better than -140d Bc/Hz at 10k Hz) Specified Over the Full Military Temperature Range Low Power Dissipation 420m W (typ) 5V Single Supply Operation High Input Sensitivity Very Wide Operating Frequency Range Available as DESC SMD 5962-9066101MPA Ordering Information SP8802/A/DG Military temperature range DES9066101/AC/DGAZ (SMD) Thermal Characteristics θja = 150°C/W θjc = 50°C/W Description The SP8802 is one of a range of very high speed low power prescalers for professional and military applications. The device Features a plementary output stage with on chip current source for the emitter follower outputs Absolute Maximum Ratings Supply voltage VCC Clock Input voltage Storage temperature range Junction temperature 6.5V 2.5V p-p -65°C to +150°C +175°C SUPPLY 1 VCC VREF (2V) 400 400 7 ÷2 6 INPUT INPUT 2 3 10m A 6.75m A 2m A OUTPUT OUTPUT 500 500 5 GND Figure 1 SP8802 Block diagram SP8802 Advance Information INPUT INPUT NC SP8802 1 2 3 4 8 7 6 5 NC OUTPUT OUTPUT GND DG8 Figure 2 Pin connections Electrical Characteristics Guaranteed over the temperature range Tamb -55°C to +125°C (see note) and supply voltage range 4.75V to 5.25V. Tested at Tamb = -55°C and +100°C, VCC = 4.75V and 5.25V. Characteristic Supply current Input sensitivity 0.65GHz to 2.8GHz 3.3GHz Input impedance (series equivalent) Output Voltage with fin = 1000MHz Output Voltage with fin = 3GHz NOTE: Devices must be used with a suitable heatsink to maintain chip temperature below 175°C when operating at Tamb>100°C. VIN (m V RMS INTO 50...