Datasheet4U Logo Datasheet4U.com

DW9255 - 35.42MHz SAW Filter

Description

GPS receiver RF Front-end Miniature GPS receiver RF Front-end Data Reference DS4056 DS4374 LCS12/4 Fig.1 Pinout 1 DW9255 GPS Antenna SAW 1st IF Filter LNA GP2010/15 RF Front End DW9255 Clock Crystal GP2021 12 channel Correlator + Support Functions DATA BUS ADDRESS BUS TO PROCESSOR TCXO 2 x

Features

  • INPUT + s Insertion Loss of 17dB ±1dB (typical) s 1dB Bandwidth 1.9MHz (typical) s Passband Ripple 0.8dB (typical) s Low Profile Ceramic Surface Mount Package s Operating Temperature Range -40° to +85°C GND 3 2 INPUT - s Centre Frequency of 35.42MHz 1 12 GND GND 4 11 GND DW9255.

📥 Download Datasheet

Datasheet preview – DW9255

Datasheet Details

Part number DW9255
Manufacturer Mitel Networks Corporation
File Size 34.50 KB
Description 35.42MHz SAW Filter
Datasheet download datasheet DW9255 Datasheet
Additional preview pages of the DW9255 datasheet.
Other Datasheets by Mitel Networks Corporation

Full PDF Text Transcription

Click to expand full text
DW9255 DW9255 35.42MHz SAW Filter for GPS Receivers DS3861 - 3.1 November 1997 OUTPUT+ OUTPUT- The DW9255 is a Surface Acoustic Wave (SAW) bandpass filter for use with the GP2000 Global Positioning System (GPS) receiver chip-set, available from Mitel Semiconductor. It is pre-tuned to the exact 2nd IF filter requirements of the GP2010 & GP2015 RF front-end devices, with a centrefrequency of 35.42MHz. The response is tuned for a flat passband, steep stopband and uniform passband group-delay with 3 external inductors. The device is realised on a Lithium Tantalate substrate and housed in a small leadless ceramic Surface Mount package. The DW9255 gives significant improvement in correlated GPS Signal-to-Noise Ratio (SNR) performance compared to conventional LC bandpass filter schemes.
Published: |