MT8806 Datasheet | Mitel Networks Corporation

Features - - - - - - - - - - Internal control latches and address decoder Short set-up and hold times Wide operating voltage: 4.5V to 13.2V 12Vpp analog signal capability R ON 65 Ω max. @ V DD=12V, 25°C ∆R ON ≤ 10Ω @ V DD=12V, 25°C Full CMOS switch for low distortion Minimum feedthrough and crosstalk Separate analog and digital reference supplies Low power consumption ISO-CMOS technology ISSUE 2 November 1988 Ordering Information MT8806AC 24 Pin Ceramic DIP MT8806AE 24 Pin Plastic DIP MT8806AP 28 Pin PLCC -40° to 85°C Description The Mitel MT8806 is fabricated in MITEL’s ISOCMOS technology providing low power dissipation and high reliability. The device contains a 8 x 4 array of crosspoint switches along with a 5 to 32 line decoder and latch circuits. Any one of the 32 switches can be addressed by selecting the appropriate five address bits. The selected switch can be turned on or off by applying a logical one or zero to the DATA input. VSS is the ground reference of the digital inputs. The range of the analog signal is from VDD to VEE. Chip Select (CS) allows the crosspoint array to be cascaded for matrix expansion. Applications - - - - - - Key systems PBX systems Mobile radio Test equipment/instrumentation Analog/digital multiplexers Audio/Video switching STROBE DATA RESET 1 AX0 - - - - - - - - - - - - - - - - AX1 AY0 AY1 AY2 32 32 8 x 4 5 to 32 Decoder Latches Switch Array Xi I/O (i=0-3) - - - - - - - - - - -...