SP5510 Datasheet PDF - Mitel Networks 1.3GHz Bidirectional I2C BUS Controlled Synthesiser Specs

SP5510 - 1.3GHz Bidirectional I2C BUS Controlled Synthesiser

Datasheet Summary

Description

The SP5510 is programmed from an I2 C BUS.

Data and Clock are fed in on the SDA and SCL lines respectively as defined by the I2C Bus format.

The synthesiser can either accept new data (write mode) or send data (read mode).

Features

s Complete 1.
3GHz Single Chip System s s s s s s s s s s Programmable via the I2C BUS Low Power Consumption (215mW Typ. ) Low Radiation Phase Lock Detector Varactor Drive Amp Disable 8 Controllable Outputs, 4 Bi-directional(SP5510) 5 Controllable Outputs, 4 Bi-directional (SP5510S) 5-Level ADC Variable I2C BUS Address for Picture in Picture TV ESD Protection.
Normal ESD handling precautions should be observed.

Datasheet Details

Part number	SP5510
Manufacturer	Mitel Networks
File Size	268.19 KB
Description	1.3GHz Bidirectional I2C BUS Controlled Synthesiser
Datasheet	SP5510 Datasheet
Additional preview pages of the SP5510 datasheet.

📁 Similar Datasheet

SP5511 - Bidirectional I2C Bus 4-Address Synthesiser (Zarlink Semiconductor)

SP55001 - 500MHz Low-loss SAW Filter 45MHz Bandwidth (SIPAT)

SP5502 - 1.3Ghz IC Bus 4-Address Synthesiser (Mitel Semiconductor)

SP5 - 1 and 2 WATT DC/DC CONVERTERS (Reliability)

SP5000 - Efficient ZVS CCFL monitor circuit (SI-POWER)

SP50001 - 500MHz Low-loss SAW Filter 45MHz Bandwidth (SIPAT)

SP5001 - IP Telephone Gateway User Manual (Micronet)

SP5001 - 4 Channel Common Mode Filter (Littelfuse)

SP5001 - Efficient ZVS CCFL monitor circuit (SI-POWER)

SP5001-04TTG - 4 Channel Common Mode Filter (Littelfuse)

Full PDF Text Transcription

Click to expand full text

SP5510 1.3GHz Bidirectional I2C BUS Controlled Synthesiser Supersedes version in April 1994 Consumer IC Handbook, HB3120 - 2.0 DS2184 - 4.0 Janaury 1997 The SP5510 is a single-chip frequency synthesiser designed for TV tuning systems. Control data is entered in the standard I2C BUS format. The device has four addressable currentlimited output ports (P0-P3) and four bi-directional opencollector ports (P4-P7), one of which (P6) is also a 3-bit 5-level ADC input. The information on these ports can be read via the I2C BUS. The SP5510S is a variant in a 16-lead miniature plastic package, without P0-P2 but functionally identical in other respects. Both variants have one fixed I2C BUS address and three programmable addresses, allowing two or more synthesisers to be used in a system.

Published: Jun 7, 2005 |