Datasheet4U Logo Datasheet4U.com

RA07N4047M-01 - MITSUBISHI RF MOSFET MODULE

General Description

The RA07N4047M is a 7.5-watt RF MOSFET Amplifier Module for 9.6-volt portable radios that operate in the 400- to 470-MHz range.

The battery can be connected directly to the drain of the enhancement-mode MOSFET transistors.

Key Features

  • Enhancement-Mode MOSFET Transistors (IDD≅ 0 @ VDD=9.6V, VGG=0V).
  • Pout>7.5W @ VDD=9.6V, VGG=3.5V, Pin=20mW.
  • ηT>43% @ Pout=7W (V GG control), VDD=9.6V, Pin=20mW.
  • Broadband Frequency Range: 400-470MHz.
  • Low-Power Control Current IGG=1mA (typ) at VGG=3.5V.
  • Module Size: 30 x 10 x 5.4 mm.
  • Linear operation is possible by setting the quiescent drain current with the gate voltage and controlling the output power with the input power 1 4 5.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
RA07N3340M RoHS Compliance Mitsubishi Electric
RA07H3340M RF MOSFET MODULE 330-400MHz 7W 12.5V PORTABLE/ MOBILE RADIO Mitsubishi Electric
RA07H4452M RoHS Compliance Mitsubishi Electric
RA07M0608M RoHS Compliance Mitsubishi Electric
RA07M3843M RoHS Compliance Mitsubishi Electric

Other Datasheets by Mitsubishi Electric

Part Number Description
RA07N4047M-E01 MITSUBISHI RF MOSFET MODULE
RA07N4047M MITSUBISHI RF MOSFET MODULE
RA07N4452M 440-520MHz 7.5W 9.6V PORTABLE RADIO
RA07N4452M-01 440-520MHz 7.5W 9.6V PORTABLE RADIO
RA07N4452M-E01 440-520MHz 7.5W 9.6V PORTABLE RADIO

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MITSUBISHI RF MOSFET MODULE ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECA UTIONS RA07N4047M 400-470MHz 7.5W 9.6V PORTABLE RADIO BLOCK DIAGRAM 2 3 DESCRIPTION The RA07N4047M is a 7.5-watt RF MOSFET Amplifier Module for 9.6-volt portable radios that operate in the 400- to 470-MHz range. The battery can be connected directly to the drain of the enhancement-mode MOSFET transistors. Without the gate voltage (V GG=0V), only a small leakage current flows into the drain and the RF input signal attenuates up to 60 dB. The output power and drain current increase as the gate voltage increases. With a gate voltage around 2.5V (minimum), output power and drain current increases substantially. The nominal output power becomes available at 3V (typical) and 3.5V (maximum). At VGG=3.