MF-2700FRB-M02MA Datasheet | Mitsubishi Electric

DESCRIPTION This product is designed to provide high optical performance for SDH STM-16 / SONET OC-48. Receiver uses APD pre-amp module and integrated circuits for re-shaping and re-generating (2R) optical signal. MITSUBISHI (OPTICAL DEVICES) MF-2700FRB-M0x MA SONET / SDH RECEIVER MODULE .. FEATURES - Full SONET/SDH line up - Multi rate (155Mb/s to 2.7Gb/s) - pact, low power - +5V single power supply - DC/DC converter built in - Case Temperature Range: -5 to +75deg.C - Multi Source Agreement APPLICATION Short haul and long haul digital optical munication systems for SDH STM-16 / SONET OC-48. SDH : L-16.1, L-16.2 SONET : LR-1, LR-2 UQ9-04-007 Ed:1.0 Date:22.Dec.2004 Page 1 of 8 MITSUBISHI (OPTICAL DEVICES) MF-2700FRB-M0x MA SONET / SDH RECEIVER MODULE Absolute Maximum Ratings Stress below listed absolute maximum rating may cause permanent damage to the module. This is a stress only and functional operation of the module at these or any other conditions in excess of those given in the operational sections of this data sheet . Exposure to Absolute Maximum Rating for extended periods may affect module reliability. Tc=25deg.C. Parameters Supply voltage LPA, OIL output current DTV input voltage Storage temperature Operating case temperature Soldering Temperature Soldering Time Relative humidity(non condensation) Fiber bend radius Symbol Vcc Tstg Tc Ratings +6.0 +/- 20 0 to Vcc -40 to +85 -5 to +75 +250 10 10 to 80 30 Unit V m A V deg.C. deg.C. deg.C. sec % mm Block diagram DC/DC APD control Amplifier Monitor parator APD OPT.IN Decider Preamp DATA out AGC amp DTV in APD-Preamp Module LPA out OIL out DATA out UQ9-04-007 Ed:1.0 Date:22.Dec.2004 Page 2 of 8 MITSUBISHI (OPTICAL DEVICES) MF-2700FRB-M0x MA SONET / SDH RECEIVER MODULE Electrical and Optical characteristics All parameters are specified over the operating case temperature. Measurement conditions are at NRZ PN223-1 and 50% duty cycle data signal. Electrical characteristics Parameters Conditions...