Datasheet4U Logo Datasheet4U.com

M56782FP - 4 CHANNEL ACTUATOR DRIVER

General Description

The M56782FP is a semiconductor integrated circuit in order to drive 4ch actuator.

Key Features

  • q Large power dissipation q 3.3V DSP available. q Low saturation voltage. (Typical 1.35V at load current 0.5A and no bootstrap condition. ) q There are two motor power supplies. Vm1 CH1, 2 motor power supply-1 Vm2 CH3, 4 motor power supply-2 q Flexible Input amp. setting. (It enables PWM control. ) q Low cross-over distortion. q Wide supply voltage range. (4.5V.
  • 13.2V) q Built-in Thermal Shut Down circuit. q Built-in Mute circuit. M56782FP 10 GND 33 32 31 30 29 28 27 26 25 24 23 22 VM4.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
M56710FP F2F Magnetic Stripe Encoding Card Reader Renesas Technology
M56733AFP 3-Phase Brushless Motor Driver Renesas
M56750FP 3-PHASE BRUSHLESS MOTOR DRIVER Hitachi
M56760FP PLL Frequency Synthesizer Mitsubishi Electric
M5600 Wireless Pressure Transducer TE

Other Datasheets by Mitsubishi Electric

Part Number Description
M56781FP 2-CHANNEL ACTUATOR MOTOR DRIVER
M56783AFP 3 CHANNEL ACTUATOR DRIVER
M56784FP SPINDLE MOTOR DRIVER
M56785FP SPINDLE MOTOR DRIVER
M56786FP SPINDLE MOTOR AND 1CH ACTUATOR DRIVER

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MITSUBISHI M56782FP 4 CHANNEL ACTUATOR DRIVER DESCRIPTION The M56782FP is a semiconductor integrated circuit in order to drive 4ch actuator. PIN CONFIGURATION (TOP VIEW) IN1+ VBS1 Vm1 IN1OUT1 VM1VM1+ 1 2 3 4 5 6 7 8 9 42 41 40 39 38 37 36 35 34 OUT3 IN3VBS2 Vm2 IN3+ VM3VM3+ FEATURES q Large power dissipation q 3.3V DSP available. q Low saturation voltage. (Typical 1.35V at load current 0.5A and no bootstrap condition.) q There are two motor power supplies. Vm1 CH1, 2 motor power supply-1 Vm2 CH3, 4 motor power supply-2 q Flexible Input amp. setting. (It enables PWM control.) q Low cross-over distortion. q Wide supply voltage range. (4.5V – 13.2V) q Built-in Thermal Shut Down circuit. q Built-in Mute circuit.