Datasheet4U Logo Datasheet4U.com

M57959L - Hybrid-IC

General Description

M57959L is a hybrid integrated circuit designed for driving n-channel IGBT modules in any gate amplifier application.

This device operates as an isolation amplifier for these modules and provides the required electrical isolation between the input and output with an opto-coupler.

Key Features

  • ٗ Built in high CMRR optocoupler (VCMR : Typical 30kV/µs, Min. 15kV/µs) ٗ Electrical Isolation between input and output with opto-couplers (Viso = 2500, VRMS for 1 min. ) ٗ TTL compatible input interface VIN 8 1 DZ1 30V 5 Rext VOUT tr tf 90% D1.
  • 13 Opto-Coupler 6 VEE Gate Shutdown Circuit 8 Fault Output Outline Drawing 43.0 MAX Dimensions in mm 22.0 MAX 4.5 ± 1.5 0.35 ± 0.2 11.0 MAX 5.5 MAX 14 3.5 MAX 8.5 MAX 0.55 ± 0.2 2.54 max 5.5 MAX 1 2.54 × 13 = 33.02 Test Circuit R 4.7 kΩ.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
M57959AL-01 IGBT MODULE GATE HYBRID-IC ETC
M579-xx Ovenized Oscillators Corning Frequency
M57903L Hybrid-IC Powerex
M57904L Hybrid-IC Powerex
M57924 5e LAN / 4 Pair / 24 Awg UTP Category 5e Cable Mohawk

Other Datasheets by Mitsubishi Electric

Part Number Description
M57950L Hybrid-IC
M57951L Hybrid-IC
M57955L Hybrid-IC
M57957L Hybrid-IC
M57958L Hybrid-IC

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MITSUBISHI HYBRID ICs M57959L HYBRID IC FOR DRIVING IGBT MODULES Block Diagram 4 VCC 14 185Ω Detect Circuit Timer and Reset Circuit Interface 5 VOUT 1 Detect Pin Hybrid Integrated Circuit For Driving IGBT Modules Description: M57959L is a hybrid integrated circuit designed for driving n-channel IGBT modules in any gate amplifier application. This device operates as an isolation amplifier for these modules and provides the required electrical isolation between the input and output with an opto-coupler. Short circuit protection is provided by a built in desaturation detector. A fault signal is provided if the short circuit protection is activated. Features: ٗ Built in high CMRR optocoupler (VCMR : Typical 30kV/µs, Min.